Koppeling(sets)

02J-B / 02S vast vliegwiel

Past op alle VW / Audi / Seat en Skoda 5 & 6 versnellingsbakken

Op maat gemaakt voor VR6 koppeling kit 
Populaire conversie op de 1.9 TDi motoren
De Vaste Vliegwiel Kits zijn een populaire conversie op de 1.9 TDI-motoren en het dubbelmassa vliegwiel te vervangen omdat deze vaak het hogere vermogen niet goed aan kunnen. De Koppeling Kit is geschikt tot 410N

Dit vliegwiel is alleen geschikt ism een VR6 koppeling en drukgroep

SILENT Single Mass Flywheel and Clutch Kit

 Fits ALL VW / Audi / Seat and Skoda 1.6 TDI 5 Speed Vehicles

This kit consists of:
CNC Machined Single Mass Flywheel
Sachs 228mm Organic Clutch Disc
Sachs Pressure Plate
Release Bearing
Flywheel and Pressure Plate Bolts
Alignment Tool

The Solid Flywheel Kits are a conversion for the 1.6 TDI & 2.0 TDI 5 Speed Models to remove the OEM Dual Mass Flywheel when running increased power

The Clutch Kit is rated to 300Ft/Lbs (410Nm) with a stock pedal feel and bite

Using the Sachs Race Pressure Plate this will handle another 50Ft/Lbs (470Nm)

Please note - there may be some slight noise or vibration with this kit on the Common Rail Engine, but this will be minimal compared to other Solid Flywheel Conversions

Sachs 1.6 & 2.0 TDi Dual Mass Flywheel and Clutch Kit (For Vehicles WITH Stop / Start Function)

Fits VW / Audi / Seat and Skoda 1.6 & 2.0 TDI 5 Speed Vehicles 

This kit consists of:
Genuine SACHS 228mm Dual Mass Flywheel 
Genuine SACHS Clutch Disc
Genuine SACHS Pressure Plate
Genuine SACHS Releaser
 Genuine SACHS Flywheel and Pressure Plate Bolts

SACHS Part Numbers
Complete Module with Releaser - 2290 601 074  /  2290601074

Flywheel and Clutch Kit - 2289 000 257 / 2289000257
Flywheel - 2294 001 360 / 2294001360
Clutch Kit (Sachs) - 3000 970 036 / 3000970036
Releaser - 3151 000 388 / 3151000388

This is a direct replacement for the OE Sachs or LUK Flywheel found on the later (2010- ) 1.6 TDI VW Group Vehicles 5 Speed Gearboxes with the Stop / Start function (inc Bluemotion)

Sachs VR6 Clutch Kit

Fits ALL VW / Audi / Seat and Skoda 4 Cyl 02J / 02A 5 Speed Vehicles

Genuine SACHS VR6 Clutch Disc
Genuine SACHS VR6 Pressure Plate
Genuine SACHS Release Bearing

These are a popular conversion on the VW Golf Mk4 Platform with 1.8T and 1.9 TDI Engines to remove the OEM Dual Mass Flywheel, when either running increased power or the DMF fails

The kits have been used on vehicles with 300Ft/Lbs+ (410Nm) with no issues. We have one in our Mk2 Caddy TDi Van which has 318Ft/Lbs (430Nm) and it works perfectly

This kit consists of:

Genuine SACHS Silent 228mm Clutch Disc
Genuine SACHS Pressure Plate
Genuine SACHS Release Bearing

These are a popular conversion on the 1.9 TDI Engines to remove the OEM Dual Mass Flywheel, when either running increased power or the DMF fails

 For those who require an even stronger kit, we can offer a range of kits to suit your needs. Please check out the shop or contact us if you cannot find what you are looking for

This will need to be used with our 02J / 02J-B Flywheel and can be used in place of the VR6 Clutch kit

This kit will NOT fit Mk4 platform vehicles with a 6 Speed Transmission. Please see our other items or contact us if you require a 240mm 6 Speed Clutch and Flywheel

VAG Single Mass Flywheel and Clutch Kit

Fits ALL VW / Audi / Seat and Skoda 4 Cyl 02J / 02A / 02R 5 Speed Vehicles 1.8T en 1.9TDI

CNC Machined G60 228mm Single Mass Flywheel 
Genuine SACHS SRE Clutch Disc
Genuine SACHS SRE Pressure Plate
Genuine SACHS Release Bearing
Genuine VW Flywheel and Pressure Plate Bolts

There is a choice of Organic or Sintered Clutch Disc dependent on preference, sintered can be considered 'grabby' but holds slightly more torque than the Organic model. The Sachs SRE Uprated Clutch Disc and Pressure Plate will hold 390lb/ft+ (530Nm)

We recommend the 10kg flywheel for road car applications as this is a similar weight to the dual mass flywheel so driving characteristics remain unchanged.

The 7kg flywheel is more suited to race and fast road petrol applications as where faster reving and more engine breaking is required. 

Fits ALL VW / Audi / Seat and Skoda 4 Cyl 02J / 02A / 02R 5 Speed Vehicles

CNC Machined 228mm Single Mass Flywheel 
Genuine SACHS VR6 Clutch Disc
Genuine SACHS VR6 Pressure Plate
Genuine SACHS Release Bearing
Genuine VW Flywheel and Pressure Plate Bolts

These are a popular conversion on the VW Golf Mk4 Platform with 1.8T and 1.9 TDI Engines to remove the OEM Dual Mass Flywheel, when either running increased power or the DMF fails

The kits have been used on vehicles with 300Ft/Lbs+ (410Nm) with no issues. We have one in our Mk2 Caddy TDi Van which has 318Ft/Lbs (430Nm) and it works perfectly

For those who require an even stronger kit, we can offer a range of kits to suit your needs. Please check out the shop or contact us if you cannot find what you are looking for

 We also have the option of the standard 10kg flywheel or the lightened 7kg Flywheel

We recommend the 10kg flywheel for road car applications as this is a similar weight to the dual mass flywheel so driving characteristics remain unchanged.

The 7kg flywheel is more suited to race and fast road petrol applications as where faster reving and more engine breaking is required. 

This kit will NOT fit vehicles with a 6 Speed Transmission. Please see our other items or contact us if you require a 6 Speed Clutch and Flywheel

This kit will NOT fit vehicles with the longitudinal Engine, Please see our other listings if you require a clutch and Flywheel for this Model

PLEASE NOTE - As with most of the Single Mass Flywheel Kits Available, there will be some noise at low RPMs and at idle. This is completely normal and will not damage your gearbox or engine

In some cases the dust tin may need slight modification with the 10kg flywheel

Sachs 1.9 TDi Dual Mass Flywheel and Clutch Kit

Fits VW / Audi / Seat and Skoda 1.9 TDI 5 Speed Vehicles

This kit consists of:
Genuine SACHS 228mm Dual Mass Flywheel 
Genuine SACHS Clutch Disc
Genuine SACHS Pressure Plate
Genuine SACHS Release Bearing
 Genuine SACHS Flywheel and Pressure Plate Bolts

SACHS Part Numbers
Complete Module w Releaser - 3000 951 790 / 3000951790

Flywheel and Clutch Kit - 2289 000 041 / 2289000041
Flywheel - 2294 000 329 / 2294000329
Clutch Kit - 3000 845 701 / 3000845701
Releaser - 3151 000 388 / 3151000388

This is a direct replacement for the OE Sachs or LUK Flywheel found on the earlier (1998-2004 ) 1.9 TDI VW Group Vehicles with 5 Speed Gearboxes

This will also fit the newer Seat ibiza & VW Polo with the 1.6 TDi Common Rail Engine with the 5 Speed Gearbox

Single Mass Flywheel and Clutch Kit

 Fits ALL VW / Audi / Seat and Skoda 1.9 TDI 5 Speed 02J-B & 6 Speed 02S Vehicles

This kit consists of:
CNC Machined Single Mass Flywheel
Genuine SACHS SRE Clutch Disc
Genuine SACHS SRE Pressure Plate
Release Bearing
Flywheel and Pressure Plate Bolts

  The Solid Flywheel Kits are a popular conversion on the 1.9 TDI Engines to remove the OEM Dual Mass Flywheel when running increased power. 

There is a choice of Organic or Sintered Clutch Disc dependent on preference, sintered can be considered 'grabby' but holds slightly more torque than the Organic model. The Sachs SRE Uprated Clutch Disc and Pressure Plate will hold 320lb/ft Organic , 370lb/ft Sintered.